BZ100-AN

BZ100-AN is an Enterprise Class SMART  Outdoor Access System to provide Point-to-Point (PTP) backhaul systems and Point-to-Multipoint (PMP) Connectivity systems.

BZ100-AN efficiently addresses Full Service Providers, WISPs and Enterprises requiring deployment of short range/medium range Access Solutions.

  • Outdoor Wireless Backhaul system and Subscriber system based on MIMO technology
  • High data rate up to 300 Mbps
  • Outdoor Unit (ODU) with integrated PoE support
  • Complete Management with SNMP, CLI (Telnet) and Web Server
  • Near-Line of Sight (NLOS) and Line of Sight (LOS) deployments with high penetration level
  • Comprehensively managed by BZ Service Management Gateway
  • Powered by TrueEXORTM (for NLOS Capability), FastEXORTM
  • (for high throughput) and PowerFLEXTM (Power variants on a system level basis) technologies.
Configuration
Architecture BZ100-AN Outdoor Unit Form Factor
Radio
Frequency Range 5.150 – 5.350 GHz, 5.725 – 5.825 GHz, 5.825 – 5.875 GHz
Data Rate Physical Data Rate : 300Mbps
Channel Bandwidth 20MHz , 20/40MHz, 40MHz
Duplex Technology TDD
Modulation OFDM – BPSK / QPSK / 16QAM / 64QAM DSSS – CCK
System Transmit Power ( ± 1.5 dBm) 5.8 GHz :11a mode ( HT20 )17.5 dBm@MCS15,22 dBm@MCS0

( HT40 ) 17.5 dBm@MCS15, 24 dBm@MCS0

Receiver Sensitivity 5GHz: HT20(-70dBm@MCS15),HT40(-71dBm@MCS15)
Integrated Antenna 16dBi 5.8 GHz
Network Interface
interface type 1 x 10/100/1000Mpbs Ethernet Port Auto MDI/MDI-X support
Framing / Coding IEEE 802.3u
Flow Control IEEE 802.3x
Infrastructure Management
Security 64/128 bit WEP data encryption MAC address Filtering ,
MAC address filtering , WPA-EAP , WPA2– EAP , WPA – PSK ,
WPA2-PSK , 802.1x ,User Authentication , AES , SSID
Broadcast Disable function , multiple SSID
Device Management Web server, Telnet/SSH, SNMP
Software Management Remote firmware up-gradation through Telnet/SSH
Wireless Configuration Access point, Station, Station WDS, Access Point WDS, Repeater
Diagnostics Wireless Scanning
Electrical and Physical Specifications
Power Feeding 48V Passive Power over Ethernet
Approximate Dimension L x W x H (Inches) 8.93” X 10.12” X 3.39”
Mounting Pole or Mast
Environmental Specifications
Outdoor Unit Enclosure Weather proof casing
ODU Operating Temperature -20°C to 70°C (-4 ° F to 158 ° F )
Humidity Up to 95% (non-condensing)